Difference between revisions of "Event Model Decomposition"

From Event-B
Jump to navigationJump to search
imported>Pascal
imported>Pascal
(3 intermediate revisions by the same user not shown)
Line 198: Line 198:
 
     <math>G(x_1,...,x_n,s_1,...,s_m)~</math>       
 
     <math>G(x_1,...,x_n,s_1,...,s_m)~</math>       
 
   '''THEN'''                   
 
   '''THEN'''                   
     <math>s_1 \bcmsuch (\exists y_1 \qdot P_1(x1,...,x_n,s_1,...,s_m,y_1)) \land ... \land (\exists y_n \qdot P_n(x_1,...,x_n,s_1,...,s_m,y_n)) \land P_{n+1}(x_1,...,x_n,s_1,...,s_m,s_1')</math>
+
     <math>s_1 \bcmsuch P_{n+1}(x_1,...,x_n,s_1,...,s_m,s_1')</math>
 
     ...
 
     ...
     <math>s_m \bcmsuch (\exists y_1 \qdot P_1(x1,...,x_n,s_1,...,s_m,y_1)) \land ... \land (\exists y_n \qdot P_n(x_1,...,x_n,s_1,...,s_m,y_n)) \land P_{n+m}(x_1,...,x_n,s_1,...s_m,s_m')</math>
+
     <math>s_m \bcmsuch P_{n+m}(x_1,...,x_n,s_1,...s_m,s_m')</math>
  
In this example, the rules [[Rewriting_rules_for_event_model_decomposition#rule_4|4]] and [[Rewriting_rules_for_event_model_decomposition#rule_7|7]] shall be applied.
+
In this example, the rules [[Rewriting_rules_for_event_model_decomposition#rule_4|4]], [[Rewriting_rules_for_event_model_decomposition#rule_7|7]] and [[Rewriting_rules_for_event_model_decomposition#rule_8|8]] shall be applied.
 
 
<font color="red">TODO. It should be possible to delete the existential predicates, because the feasibility (FIS) has been proved in the non-decomposed machine?</font>
 
  
 
===== Partitioning the events in the sub-machines of the decomposition =====
 
===== Partitioning the events in the sub-machines of the decomposition =====
Line 296: Line 294:
 
We will see in this section how to distribute the axioms among the sub-contexts, once the carrier sets and constants have been copied.  
 
We will see in this section how to distribute the axioms among the sub-contexts, once the carrier sets and constants have been copied.  
  
<font color="red">TODO</font>
+
<font color="red">TODO.
 +
An axiom is copied in a sub-machine <math>M_x</math> if and only if <math>M_x</math> contains the referenced constants and sets?
 +
</font>
  
 
== High-level Specification ==
 
== High-level Specification ==
Line 374: Line 374:
  
 
== Bibliography ==
 
== Bibliography ==
 
+
* J.R. Abrial, <font id="ancre_3">''The B-book: assigning programs to meanings''</font>, Cambridge University Press, 1996 (ISBN 0-521-49619-5).
 
* J.R. Abrial, Mathematical Models for Refinement and Decomposition, in ''The Event-B Book'', to be published in 2009 ([http://www.event-b.org/abook.html lien externe]).
 
* J.R. Abrial, Mathematical Models for Refinement and Decomposition, in ''The Event-B Book'', to be published in 2009 ([http://www.event-b.org/abook.html lien externe]).
 
* J.R. Abrial, <font id="ancre_1">''Event Model Decomposition''</font>, Version 1.3, April 2009.
 
* J.R. Abrial, <font id="ancre_1">''Event Model Decomposition''</font>, Version 1.3, April 2009.

Revision as of 16:35, 3 July 2009

Introduction

One of the most important feature of the Event-B approach is the ability to introduce new events during refinement steps, but a consequence is an increasing complexity of the refinement process when having to deal with many events and many state variables.

The main idea of the decomposition is to cut a model A into sub-models A_1, ..., A_n, which can be refined separately and more comfortably than the whole.

The constraint that shall be satisfied by the decomposition is that these refined models might - the recomposition will never be performed in practice - be recomposed into a whole model C in a way that guarantees that C refines A. An event-based decomposition of a model is detailed in Event Model Decomposition: the events of a model are partitioned to form the events of the sub-models. In parallel, the variables on which these events act are distributed among the sub-models.

The purpose is here to precisely describe what is required at the Rodin platform level to integrate this event model decomposition, and to explain why. The details of how it could be implemented are out of scope.

Terminology

A model can contain contexts, machines, or both. The notion of model decomposition covers on the one hand the machine decomposition, and on the other hand the context decomposition, both being interdependent.

  • Sub-machine: A machine built from a non-decomposed machine during the event model decomposition.
  • Sub-context: A context built from a non-decomposed context during the event model decomposition.
  • Shared variable: A variable of a given machine which is accessed by events distributed in distinct sub-machines (by opposition to private variable).
  • Private variable: A variable of a given machine which is only accessed by events of the same sub-machine (by opposition to shared variable).
  • External event: An event of a sub-machine which is built from an event of the non-decomposed machine, and which simulates the way the shared variables (between this sub-machine and another sub-machine) are handled in the non-decomposed machine (by opposition to internal event).
  • Internal event: An event copied from the non-decomposed machine to a sub-machine, according to the end-user specified distribution (by opposition to external event).

Note that a variable is said to be accessed when it is read or written. More precisely, such an access may be performed by a predicate (invariant, guard, witness) or in an assignment (action).

Models.png

Low-level Specification

The low-level specification details through several steps how the event model decomposition shall be performed, and in which order. It establishes a distinction between the steps performed on the end-user's initiative, and the computed ones. It links when possible to the already implemented features of the Rodin platform which can be used at some steps.

Decomposition of a machine in sub-machines

The purpose of this paragraph is to specify how to decompose a machine in sub-machines.

The hierarchy of machines (see the REFINES clauses) shall be first flatten (virtually or not), as illustrated below. The resulting machine is considered as being the non-decomposed machine from which the sub-machines shall be built.
Note that it may be necessary to rename some variables or invariants.

Flattening machines.png

About the variables

Some variables are needed by several sub-machines of the decomposition. As a consequence, these variables shall be replicated in the sub-machines. Beyond that, since it is not possible to ensure that such a variable will be refined in the same way in each sub-machine, they shall be given a special status (shared variable), with the limitation that they cannot be refined.

We will specify in this section how to introduce the notion of shared variable in the Rodin platform, and how to check the associated rules.

Defining a variable as shared

The following DTD excerpt describes the structure of a variable in the Rodin database:

<!ENTITY % NameAttDecl "name CDATA #REQUIRED">
<!ENTITY % CommentAttDecl "org.eventb.core.comment CDATA #IMPLIED">
<!ENTITY % IdentAttDecl "org.eventb.core.identifier CDATA #REQUIRED">

<!ELEMENT %variable; EMPTY>
<!ATTLIST %variable;
  %NameAttDecl;
  %CommentAttDecl;
  %IdentAttDecl;
  >

A first possibility to tag a variable as shared would be to add a shared specific attribute, which would be set to true if and only if the variable is shared:

<ENTITY % shared "org.eventb.core.shared CDATA #REQUIRED">

<!ELEMENT %variable; EMPTY>
<!ATTLIST %variable;
  ...
  %shared; (false|true) #REQUIRED
  >

Another possibility would be to define a more generic attribute, which could take different values, according to the nature of the variable:

<ENTITY % nature "org.eventb.core.nature CDATA #REQUIRED">

<!ATTLIST %variable;
  ...
  %nature; (0|1) #REQUIRED
  >

The second option, which has the main advantage to be more scalable, is retained here.

Ensuring that a shared variable is not data-refined

A shared variable shall always be present in the state space of any refinement of the component. The verification shall be added to those already performed by the static checker. The static checker shall have a way to determine if a given variable is shared or not.

Partitioning the variables in the sub-machines of the decomposition

The first question raised by the partition of the variables is whether it shall be the first stage of the decomposition, or not. Let's first suppose that the answer is "yes". The case where e is an event that accesses a variable v1 associated to a sub-machine M1 and a variable v2 associated to a sub-machine M2 cannot be successfully handled: should e be associated to M1 or to M2? Moreover, contrary to the events, the variables are not essentially bearers of meanings, and they cannot by themselves guide the decomposition.

As a consequence, it is pertinent to assume that the events have been first partitioned. The following cases have then to be taken into consideration when dealing with the variable distribution:

  • If v is a variable that is only accessed by events of a given sub-machine m, then v is a private variable of m, and it shall be moved to m.
  • If v is a variable that is accessed by events of distinct sub-machines m_1, ..., m_n, then v is a shared variable, and it shall be duplicated in all sub-machines.

If all the variables are shared at the conclusion of the partition, the end user shall be notified (it certainly means that the decomposition was not judicious!).

About the events

It shall be possible to simulate the way the shared variables are handled in the non-decomposed machine. This is precisely the purpose of the so-called external events.

We will examine in this section how to define such events in the Rodin platform, how to construct them, and how to enforce the rules that apply (in particular, these events cannot be refined).

Identifying an event as external

An attribute is already defined, which is introduced below, to precise the nature of an event. A first solution would be to add another masked value (eg. 4) to encode the external status.

<!ENTITY % convergence "org.eventb.core.convergence">

<!ATTLIST %event;
 ...
 %convergence; (0|1|2) #REQUIRED
 ...
 >

Another solution would be to add a distinct external attribute, which would be set to true if and only if the event is external:

<ENTITY % external "org.eventb.core.external CDATA #REQUIRED">

<!ATTLIST %event;
 ...
 %external; (false|true) #REQUIRED
 >

This solution is preferred because the notion of external event is totally orthogonal to the notion of convergence.

Constructing an external event

The construction of an external event highly relies on some rewriting / simplification rules. It is recommended to peruse them before reading further.

e is an event of M, v_i are private variables of M, s_i are shared variables between M and the destination sub-machine (i.e. the sub-machine where the external event will be dispatched), P, P_i, Q_i are before-after predicates of M, and G is a predicate of M.

Generic construction
We first focus on the generic construction of an external event from an event of a sub-machine M whose action is expressed as follows:

 e
 WHERE 
   G(v_1,...,v_n,s_1,...,s_m)~      
 THEN                  
   v_1,...,v_n,s_1,...,s_m \bcmsuch P(v1,...,v_n,s_1,...,s_m, v_1',...,v_n',s_1',...,s_m')
  1. The first step of the construction consists in replacing the private variables by parameters. Note that this step is purely fictive, because assigning an event parameter is not allowed!
  2. e ANY x_1,...,x_n~ WHERE G(x_1,...,x_n,s_1,...,s_m)~ THEN x_1,...,x_n,s_1,...,s_m \bcmsuch P(x1,...,x_n,s_1,...,s_m, x_1',...,x_n',s_1',...,s_m')
  3. The second step consists in adding guards to define the types of the parameters, if necessary. More precisely, a theorem shall be added for each parameter for which typing is required. The .bcm file associated to the non-decomposed machine shall be parsed in order to retrieve the typing information.
  4. The third and last step of the construction consists in introducing an existential quantifier to resolve the invalid assignment. external\_e is the newly built external event.
  5. external_e ANY x_1,...,x_n~ WHERE G(x_1,...,x_n,s_1,...,s_m)~ THEN s_1,...,s_m \bcmsuch \exists y_1,...y_n \qdot P(x1,...,x_n,s_1,...,s_m, y_1,...,y_n,s_1',...,s_m')

Derived constructions
Then, it is possible to derivate the construction for other actions:

  1. Rewriting rules 1 to 5 shall be first applied as many times as possible, from left to right, to get the action into the generic form introduced before.
  2. Then, the steps detailed for the generic construction shall be followed.
  3. Then, the simplification rules 6 to 8 shall be enforced.
  4. Finally, the Rewriting rules 1 to 4 shall be applied, from right to left.

Thus, if P_i(x_1,...,x_n,s_1,...,s_m,s_i')~ is equal to s_i' = Q_i(x_1,...,x_n,s_1,...,s_m)~, and if there is no private variable (i.e. there is no existential quantifier on the right-hand side of the assignments), then s_i \bcmsuch P_{n+i}(x_1,...,x_n,s_1,...s_m,s_i') shall be rewritten as s_i \bcmeq Q_i(x_1,...,x_n,s_1,...,s_m).
The proof obligations generated for deterministic actions are indeed more suitable than those generated for non-deterministic actions.

In the same manner, P_i(x_1,...,x_n,s_1,...,s_m,s_i')~ is equal to s_i' \in Q_i(x_1,...,x_n,s_1,...,s_m), and if there is no private variable (i.e. there is no existential quantifier on the right-hand side of the assignments), then s_i \bcmsuch P_{n+i}(x_1,...,x_n,s_1,...s_m,s_i') shall be rewritten as s_i \bcmin Q_i(x_1,...,x_n,s_1,...,s_m).
For a given set S, proving that \exists x \qdot x \in S (FIS proof obligation generated from x \bcmsuch x' \in S) is indeed not as "simple" as proving that S \neq \emptyset (proof obligation generated from x \bcmin S).

Example

 e
 WHERE 
   G(v_1,...,v_n,s_1,...,s_m)~      
 THEN                  
   v_1 \bcmsuch P_1(v_1,...,v_n,s_1,...,s_m,v_1')
   ...
   v_n \bcmsuch P_n(v_1,...,v_n,s_1,...,s_m,v_n')
   s_1 \bcmsuch P_{n+1}(v_1,...,v_n,s_1,...,s_m,s_1')
   ...
   s_m \bcmsuch P_{n+m}(v_1,...,v_n,s_1,...,s_m,s_m')
 external_e
 ANY x_1,...,x_n~
 WHERE 
   G(x_1,...,x_n,s_1,...,s_m)~      
 THEN                  
   s_1 \bcmsuch P_{n+1}(x_1,...,x_n,s_1,...,s_m,s_1')
   ...
   s_m \bcmsuch P_{n+m}(x_1,...,x_n,s_1,...s_m,s_m')

In this example, the rules 4, 7 and 8 shall be applied.

Partitioning the events in the sub-machines of the decomposition

The following sequence shall be followed:

  • The events shall be first partitioned, as indicated by the end-user. More precisely, machines shall be created, according to this partition. At this step, the machines shall only contain the specified events. In particular, the SEES and REFINES clauses shall be empty. Moreover, note that it may be necessary to rename some events when performing the partition.
  • The Rodin platform shall then be able to distribute the variables, according to the event partition (see Variable partition).
  • The Rodin platform shall be able to distribute the invariants, according to the variable partition (see Invariant partition).
  • If e is an event that modifies a shared variable s (i.e. s is listed among the free identifiers on the left-hand side of an assignment), then an external event that modifies s shall be built from e in each sub-machine where s is accessed.

N.B. : Note that the construction of an external event depends on the source sub-machine (i.e. the sub-machine containing the internal event e from which the external event is to be built) and on the destination sub-machine (i.e. the sub-machine where the external event is to be built).
Building an external event from a given event e modifying a shared variable s and duplicating it in each sub-machine where s is accessed does not indeed entirely fit the requirements, as illustrated below: the sub-machine M3 does not know the shared variable s2 and the sub-machine M1 does not know the shared variable s4.

External events.png

Propagating the convergence status

A sub-machine can be seen as a new abstract machine. As a consequence, the convergence status of a given event shall be propagated in the sub-machines as described below:

  • An event tagged as ordinary in the non-decomposed machine shall remain ordinary in the sub-machine.
  • An event tagged as convergent in the non-decomposed machine shall become ordinary in the sub-machine.
  • An event tagged as anticipated in the non-decomposed machine shall remain anticipated in the sub-machine.
  • An external event shall always be declared as ordinary.

See the modelling language for precisions on the convergence status.

Propagating the extended status

An event (external or not) of a sub-machine shall always be declared as non-extended.

Ensuring that an external event cannot be refined

The verification shall be performed by the static checker. The static checker shall have a way to determine if a given event is external or not.

Decomposing the initialization event

An initialization event shall be built in each sub-machine from the initialization event of the non-decomposed machine, and according to the distribution of the variables among these sub-machines. The construction is detailed below. initialization is the initial event and e the built event, x_i are variables (private or shared) of the sub-machine containing e, y_i are variables of other sub-machines, P is a before-after predicate and G is a predicate.

 initialization    
 THEN                  
   x_1,...,x_n,y_1,...,y_m \bcmsuch P(x1,...,x_n,y_1,...,y_m,x_1',...,x_n',y_1',...,y_m')

Only the variables of the considered sub-machine shall appear in the built initialization event; other variables shall become bound:

 e   
 THEN                  
   x_1,...,x_n \bcmsuch \exists z_1,...,z_m \qdot P(x1,...,x_n,y_1,...,y_m,x_1',...,x_n',y_1,...,y_m')

The derived cases and simplification rules introduced during the construction of the external events apply here as well.

About the invariants

We will see in this section how to distribute the invariants among the sub-machines, once the variables have been partitioned.

  • Case 1: If i is an invariant only involving private variables of a given sub-machine, then it shall be copied in this sub-machine.
  • Case 2: If i is an invariant involving private variables of distinct sub-machines, then it shall not be copied.
  • Case 3: If i is an invariant only involving shared variables, then it shall only be copied in the sub-machines containing all these variables.
  • Case 4: If i is an invariant involving private variables and shared variables, then it shall only be copied in the sub-machines containing all these variables.

These different cases are illustrated in the figure below, where P1, P2, P3 and P4 are predicates. A is an abstract machine, C is a concrete machine extending A, M is the flattened machine for C and A (see how flattening a hierarchy of machines), and M1, M2, and M3 are the sub-machines resulting from the decomposition of M. v1 is a private variable of M1, v2 is a variable shared between M1 and M2, v3 is a variable shared between M2 and M3>, and v4 is a private variable of M3.

Invariants.png

To summarize, an invariant based on a P(v_m,...,v_n)~ predicate is copied in a sub-machine M_x if and only if M_x contains the \{v_m,...,v_n\}~ variables.

If an invariant is used for typing but it has not been copied, a theorem shall be added in the sub-machines for each variable for which typing is required (otherwise a problem will be detected by the static checker). Note that there is no contradiction with the requirements on proof obligations; no proof obligation (PO) is indeed generated for predicates v \in T, where v is a variable and T is a type.

Beyond that, a workaround exists if an invariant inv, based on a P(v_m,...,v_n)~ predicate, seems useful (for example an invariant between a concrete variable and some abstract variable) but it has disappeared in a sub-machine M_x containing variables \{v_p,...,v_q\}~ (eg. inv2 and inv3 have both been excluded from M3 machine by application of the stated rules). It is indeed possible to add in the non-decomposed machine a theorem based on P~, but where the variables \{v_m,...,v_n\} \setminus \{v_p,...,v_q\} become bound, and then to perform again the decomposition. It will lead to a new proof obligation in the non-decomposed machine, which does not pose any difficulty.
For example, if a theorem inv5: P5(v4)~, with P5 \defi \exists v1 \qdot P2(v1,v4), is added to the C concrete machine, then it will be copied in the sub-machineM3 during the decomposition (see case 1). In order to prove the P5~ statement, the bound variable v1 shall obviously be instantiated with v1.

About the variants

As mentioned before, there is no convergent event in sub-machines. As a consequence, there is no need to take the variants into consideration when performing the decomposition.

Decomposition of a context in sub-contexts

The purpose of this paragraph is to specify how to decompose the contexts, according to the decomposition of the machines, and to establish how to link the sub-contexts to the sub-machines.

The hierarchy of contexts (see the EXTENDS clauses) shall be first accumulated in a single context. More precisely, a new context shall be built (virtually or not), which contains all the carrier sets, constants and axioms of the hierarchy. This context is assumed to be the non-decomposed context from which the sub-contexts shall be built.
Note that it may be necessary to rename some axioms when flattening the hierarchy.

Flattening contexts.png

Then, an empty context shall be built for each sub-machine m, which shall be linked to m through its SEES clause. Note that, at the conclusion of the context decomposition, the sub-contexts that may be empty shall not be kept, and a SEES clause shall not be added to the associated sub-machines.

About the carrier sets

A carrier set shall be visible from any sub-machine that references it, through a predicate (invariant or guard) or an assignment (action). In other terms, a carrier set of a non-decomposed context shall be copied in a sub-context if and only if this set appears in a predicate or assignment of the associated sub-machine.

About the constants

Similarly, a constant of a non-decomposed context shall be copied in a sub-context if and only if it appears in a predicate or an assignment of the associated sub-machine.

About the axioms

We will see in this section how to distribute the axioms among the sub-contexts, once the carrier sets and constants have been copied.

TODO. An axiom is copied in a sub-machine M_x if and only if M_x contains the referenced constants and sets?

High-level Specification

The high-level specification details how the event model decomposition shall be integrated into the Rodin platform as a new feature, by linking to the existing architecture.

Definition of the decomposition

It is necessary to first give a definition of the event model decomposition in the Rodin platform. Is it an Event-B project decomposition? Or, is it a decomposition performed from some well-identified machines and contexts of a given Event-B project?

The entry point for the decomposition is a machine M1, its visible contexts, and its whole parent hierarchy of machines.

Machine.png

The machine M1 to be taken as input for the decomposition shall be pointed by the end-user. The EXTENDS clauses of contexts and the SEES clauses of machines are used to build the associated hierarchy of contexts. In the same manner, the REFINES clauses allow to build the associated hierarchy of machines.

Configuration of the decomposition

The end-user shall be asked to parametrize the decomposition, and more precisely to:

  • identify the machine to be taken as input for the decomposition.
  • identify the sub-machines to be created.
  • partition the events.
  • indicate which invariants, axioms or theorems shall be ignored (because they are not required any longer).

It is more suitable for the end-user to visualize the configuration, and as a consequence it shall preferably be performed through the Graphical User Interface of the Rodin platform.

The following dialog box, which fills these requirements, is given as an example. The left-hand side displays the non-decomposed model and the right-hand side the decomposed model. The second one is built by the user, by first adding machines and then copying events from left to right. The unchecked invariants are those to be ignored, the checked events are those to be copied (the initialization events are not copied).

GUI.png

Execution of the decomposition

A Decompose action shall be added. It shall be enabled if and only if a machine is selected. It shall be available from the Project menu, from the toolbar, and in the contextual menu displayed when right-clicking on the selected project.

Action.png

A new Event-B project shall be created for each sub-machine built during the configuration. The decomposition of the sub-machine shall first be completed, and then the non-decomposed context shall be partitioned, as specified before.

As far as possible, the developments shall not be performed in the Event-B core; the dedicated extension points shall be used instead (eg. those provided for the static checker. See the plugin.xml file of the org.eventb.core package).

Generation of the proof obligations

A model to be decomposed is assumed to be proved, i.e. the proof obligations (PO) have all been handled successfully. The following conditions on PO shall be fulfilled during the decomposition:

  • The decomposition shall not generate any new proof obligation.
  • The proof obligations related to the non-decomposed model shall not be "propagated" to the decomposed models to be proved again. As a consequence, the Proof Obligation Generator (POG) shall be temporary disconnected until the decomposition is performed.

Mathematical Approach

The purpose of this section is to mathematically formalize the Event-B decomposition previously specified, and by the way to remove the possible remaining ambiguity.

Let's define \mathit{MACHINE} as the set of all machine handles, \mathit{EVENT} the set of all events, and \mathit{VAR} the set of all variables.

  • The distribution of the events of the non-decomposed machine among the different sub-machines (according to the end-user configuration) can be represented as with a partial function:

\mathit{partition}\in\mathit{EVENT}\pfun\mathit{MACHINE}
For a given sub-machine m, partition^{-1}[\{m\}]~ is then the set of internal events of m.

  • The access of a variable by a given event (according to the static-checker) can be expressed as:

\mathit{access}\in\mathit{EVENT}\rel\mathit{VAR}
For a given sub-machine m, (access;partition^{-1})[\{m\}]~ is then the set of variables accessed by the events contained in m.

  • The association of a variable with the events modifying this variable (according to the static-checker) can be specified as:

\mathit{modify}\in\mathit{VAR}\rel\mathit{EVENT}
For a given sub-machine m and a variable v \in (access;partition^{-1})[\{m\}], modify[\{v\}]~ is then the set of the events modifying v.

  • The construction of the external events for a sub-machine can be represented with a relation:

\mathit{extern}\in\mathit{MACHINE}\rel\mathit{EVENT}
It is computed as follows: extern = (modify;access;partition^{-1}) \setminus partition^{-1}
Thus, the external events of a given sub-machine m are events modifying the variables accessed by the internal events of m, but they are not internal events of m.

Example

The following example is taken from the Event Model Decomposition.

Decomposition.png

A non-decomposed machine has been decomposed in two sub-machines M1 and M2, as illustrated by the figure.
According to the terminology, in\_a and a\_2\_b are internal events of M1, and b\_2\_c and out\_c are internal events of M2. Concerning the variables, a and m are private variables of M1, c and p are private variables of M2, and b, r and s are shared variables.
The variables accessed by the internal events of M1 are a, m, b, r and s. The events modifying these variables are in\_a, a\_2\_b, which both are internal events of M1, and b\_2\_c, which is an internal event of M2. Thus, according to the definition given above, b\_2\_c is an external event for M1. In the same manner, a\_2\_b is an external event for M2.

N.B.: Note that the expression "is an external event for" is an extrapolation, and shall be literally interpreted as "should lead to the construction of an external event in".

Bibliography

  • J.R. Abrial, The B-book: assigning programs to meanings, Cambridge University Press, 1996 (ISBN 0-521-49619-5).
  • J.R. Abrial, Mathematical Models for Refinement and Decomposition, in The Event-B Book, to be published in 2009 (lien externe).
  • J.R. Abrial, Event Model Decomposition, Version 1.3, April 2009.
  • M. Butler, Decomposition Structures for Event-B, in Integrated Formal Methods iFM2009, Springer, LNCS 5423, 2009 (lien externe).