SMT Solvers Plug-in

Introduction

The SMT plug-in allows users to use SMT solvers within Rodin. It is still in development (See sources [1]).

Installation

You will need to:

• Install the Rodin Platform.
• Install the SMT Solvers Plug-in into Rodin.
  • Install veriT if you want to use it (instead of ppTrans) to translate Event-B to SMT-LIB.
• Install the SMT solvers you want to use.

Installing the Rodin Platform

Download the Rodin Platform 2.3 (Core) (around 61MB) corresponding to your operating system and install it [2].

Installing the SMT Solvers Plug-in

Launch Rodin and go to Help > Install New Software....

Click the Add button and type:

TODO

Name it (ex: SMT Solvers Plug-in 0.1.0).

In order to make the plug-in item appearing, make sure that option Group items by category is not checked.

Select item SMT Solvers Plug-in.

Click Next.

Review the item to be installed and click Next.

Read and accept the terms of the license agreement to install the plug-in.

Then click Finish.

TODO: is the security warning on unsigned content apprearing?

Click Restart Now.

The SMT Solvers Plug-in is now installed.

Installing the SMT solvers

Currently, the SMT plug-in has been tested with the following solvers:

• Alt-Ergo (INRIA Saclay)
• CVC3 (New York and Iowa Universities)
• veriT (Loria Nancy and UFRN)
• Z3 (Microsoft Research)

Installing veriT

veriT solver can be downloaded at http://www.verit-solver.org/veriT-download.php. Compilation and installation instructions are in the INSTALL file. You must set off proof production in Makefile.config, because the SMT plug-in needs solvers to check satisfiability only:

PROOF_PRODUCTION = NO
# PROOF_PRODUCTION = YES

The following tools are used in the installation process (Debian/Ubuntu platforms):

• gcc, g++: compilers
• make, ar, ranlib: build process
• wget, tar, patch: to fetch GMP and Minisat
• bison, flex, m4: build compilers and preprocessing

Do not forget to install the E-prover as well[3] (eprover package on Ubuntu platforms).

Installing Alt-Ergo

alt-ergo solver can be downloaded at http://alt-ergo.lri.fr/, or installed using the Ubuntu repository: alt-ergo package.

Installing CVC3

CVC3 solver can be downloaded at http://cs.nyu.edu/acsys/cvc3/download.html, or installed using the Ubuntu repository: cvc3 package.

Installing Z3

Z3 solver can be downloaded at http://research.microsoft.com/en-us/um/redmond/projects/z3/download.html.

Installation from the sources (for developpers)

You will need to:

• Install the Eclipse Platform.
• Install the Subclipse plug-in to use SVN in Eclipse.
• Download Rodin sources into Eclipse.
• Download SMT plug-in sources into Eclipse.
  • Install veriT if you want to use it (instead of ppTrans) to translate Event-B to SMT-LIB.
• Install the SMT solvers you want to use.

Installing the Eclipse Platform

Download Eclipse Classic (SDK) (around 170 MB) at http://www.eclipse.org/downloads/ . Install it [4].

Installing the Subclipse plug-in

Launch Eclipse and go to Help > Install New Software....

Click the Add button and type:

http://subclipse.tigris.org/update_1.6.x

Name it (ex: SUBCLIPSE 1.6).

Then select the same items as in the following image:

Under Linux, in order to use JNI, you'll need to install the following packages:

   * libsvn-java
   * subversion
   * libsvn1

and to link the installation directory in eclipse.ini, by adding:

-Djava.library.path=/usr/lib/jni

then restart Eclipse and select JavaHL in Window > Preferences > Team > SVN.

Downloading the Rodin Sources

Open the SVN Repository Exploring perspective.

Right-clic in the SVN Repositories view, then New > Repository Location. Enter the following URL : https://rodin-b-sharp.svn.sourceforge.net/svnroot/rodin-b-sharp

Select all projects in trunk > RodinCore then right-clic and Checkout....

Check out into the workspace as projects must be selected. Then click Finish.

The download might be long (might take around 15min), do not interrupt.

Warning:

Once all the sources are downloaded, get back to the Java perspective. org.eventb.core.seqprover and org.eventb.core.seqprover.tests projects might need to be recompiled: select the former and press F5.

Downloading the SMT Plug-in Sources

Do the same as to dowload Rodin sources, with projects in trunk > exploratory > fages:

• org.eventb.smt.core
• org.eventb.smt.core.tests
• org.eventb.smt.help
• org.eventb.smt.ui
• org.eventb.smt.ui.tests

Configuration

You'll need to:

• Launch the Rodin platform as to set the default Run Configuration.
• Add the SMT plug-ins to this configuration.
• Set the SMT solvers you want to use within Rodin.

Launching the Rodin Platform

Once we have downloaded the Rodin sources, and built it within Eclipse, we can launch the Rodin platform.

Enter the org.rodinp.platform project and right-clic Rodin.product file then choose Run As... > Eclipse Application.

The Rodin platform is launched and ready.

Adding the SMT plug-ins to the Run Configuration

Close the Rodin Platform. Back in the Eclipse Platform, go to the Run Configuration: Run > Run Configurations....

Select the Rodin.product configuration, and go to the Plug-ins tab. Check all the SMT Plug-ins except org.eventb.smt.core.tests and org.eventb.smt.ui.tests.

Now, you can launch the Rodin platform extended with the SMT plug-in.

SMT solvers settings

To use the plug-in, you must set up the SMT Solvers preferences by reaching the SMT solvers section: Windows > Preferences > SMT-Solvers.

Add a new SMT solver configuration into Rodin by clicking the Add button:

• Fill the Solver ID with the name you want to give to this configuration.
• Select the solver you want to use in this configuration (if it does not appear in the list, select unknown).
• Click Browse to fill the solver path.
• Fill the Solver arguments if needed. For now, veriT, Alt-Ergo and Z3 do not need any argument. CVC3 must be used with -lang smt argument.
• Select which version of SMT-LIB must be used by the plug-in (Currently, version 1.2 is the only one covered by the plug-in).
• Click OK.

Then you must select which solver will be used when calling SMT tactic by selecting this solver's line and click Select:

The selected solver is the blue one.

SMT-LIB translation settings

If you want to use veriT instead of ppTrans to translate Event-B sequents to SMT-LIB benchmarks, you need to fill the veriT path, by clicking the corresponding Browse button, and selecting the veriT binary.

The plug-in may use some temporary files to discharge a sequent. You can choose the directory to use for this purpose, by clicking the corresponding Browse button, and selecting the target directory.

Usage

We give an example of Event-B model of which proof obligation can be discharge using an SMT solver:

thm1 is a theorem which must be proved given axioms axm2..axm5.

Since we installed SMT Plug-in into the Rodin Platform, the SMT tactic button is now accessible in the Proof Control bar.

Clicking on this button will call the previously selected SMT solver, which will discharge the proof obligation if possible:

When the tactic is applied successfully, this means that the reasonner created the new proof rule:

For now, the proof tree doesn't contain any detail because SMT-LIB 1.2 doesn't implement a proof witnesses system.

Bugs and features request

• SMT-LIB 2.0 support in developpment
• Full set theory support in progress

Releases Notes

Version TODO: choose a version number for the coming release

• Initial beta-release.
• Two approaches for translating Event-B to SMT-LIB 1.2:
  • with ppTrans (included in Rodin official releases)
  • with veriT (must be installed)
• Integration of solvers successfully tested with: (notice that no solver will be included in the plug-in at all)
  • Alt-Ergo 0.93
  • Cvc3 2011-07-14
  • veriT 201107
  • z3 2.19
• Good results in the field of linear integer arithmetic with uninterpreted sort and function symbols
• Good support of basic set theory
• Full set theory support needs to be improved
• No SMT-LIB 2.0 support in this release