# Rodin Proving Perspective

## Overview

When proof obligations (POs) are not discharged automatically the user can attempt to discharge them interactively using the Proving Perspective. This page provides an overview of the Proving Perspective and its use. If the Proving Perspective is not visible as a tab on the top right-hand corner of the main interface, the user can switch to it via "Window -> Open Perspective".

The Proving Perspective consists of a number of views: the Proof Tree, the Goal, the Selected Hypotheses, the Proof Control, the Search Hypotheses, the Cache Hypotheses and the Proof Information. In the discussion that follows we look at each of these views individually. Below is a screenshot of the Proving Perspective:

## Loading a Proof

To work on an un-discharged PO it is necessary to load the proof into the Proving Perspective. To do this switch to the Proving Perspective; select the project from the Event-B Explorer; select and expand the component (context or machine); and finally select (double-click) the proof obligation of interest. A number of views will be updated with details of the corresponding proof.

Note that pressing button on the top left hand side of the Event-B Explorer will remove all discharged proof obligations (PO's) from the view.

## The Proof Tree

The proof tree view provides a graphical representation of each individual proof step, as seen in the following screenshot:

Each node in the tree corresponds to a sequent. A line is right shifted when the corresponding node is a direct descendant of the node of the previous line. Each node is labelled with a comment which indicates which rule has been applied, or which prover discharged the proof. By selecting a node in the proof tree, the corresponding sequent is loaded: the hypotheses of the sequent are loaded to the Selected Hypotheses window, and the goal of the sequent is loaded to the Goal view.

### Decoration

The leaves of the tree are decorated with one of three icons:

- means that this leaf is discharged,
- means that this leaf is not discharged,
- means that this leaf has been reviewed.

Internal nodes in the proof tree are decorated in reverse colours. Note that a "reviewed" leaf is one that is not discharged yet by the prover. Instead, it has been "seen" by the user who decided to postpone the proof. Marking nodes as "reviewed" is very convenient since the provers will ignore these leaves and focus on specific areas of interest. This allows interactive proof in a gradual fashion. In order to discharge a "reviewed" node, select it and prune the tree at that node: the node will become "brown" again (undischarged) and you can now try to discharge it.

On top of the proof tree view, one can see three buttons:

- the "
**G**" buttons allows you to see the goal of the sequent corresponding to each node, - the "
**+**" button allows you to fully expand the proof tree, - the "
**-**" allows you to fully collapse the tree: only the root stays visible.

### Manipulating the Proof Tree

#### Hiding

The little square (with a "+" or "-" inside) next to each node in the proof tree allows you to expand or collapse the subtree starting at that node.

#### Pruning

The proof tree can be pruned at a selected node; the subtree of the selected node is removed from the proof tree. The selected node becomes a leaf and is decorated with . The proof activity can then be resumed from this node. After selecting a node in the proof tree pruning can be performed in two ways:

Note that after pruning, the post-tactic is not applied to the new current sequent. The post-tactic should be applied manually, if required, by clicking on the post-tactic button in the Proof Control view. This is useful, in particular, when you want to redo a proof from the beginning. The proof tree can be pruned at its root node and then the proof can proceed again, with invocation of internal or external provers; or with interactive proof.

Before pruning a particular node, the node (and its subtree) can be copied to the clipboard. If the new proof strategy subsequently fails, the copied version can be pasted back into the pruned node (see the next section).

#### Copy/Paste

By selecting a node in the proof tree and then right-clicking with the mouse, you can copy the part of the proof tree starting at that sequent (the node and its subtree). Pasting the node and subtree back in is done in a similar manner, with a right mouse click on a proof node. This allows reuse of part of a proof tree in the same, or even in another, proof.

## Goal and Selected Hypotheses

The nodes in the proof tree view correspond to sequents. A user will work with one selected node, and thus one sequent, at a time; attempting various strategies in an effort to show that the sequent goal is true. The "Goal" and "Selected Hypotheses" views provide information to the user about the currently selected sequent. Here is an example:

A hypothesis can be removed from the list of selected hypotheses by selecting the check the box situated next to it (you can click on several boxes) and then by clicking on the button at the top of the selected hypotheses window:

Here is the result:

Note that the deselected hypotheses are not lost: you can find them again using the Search Hypotheses button in the Proof Control view. Other buttons are used as follows:

- next to the goal - proof by contradiction 1: The negation of the
**goal**becomes a selected hypothesis and the goal becomes "**⊥**".

- next to a selected hypothesis - proof by contradiction 2: The negation of the
**hypothesis**becomes the goal and the negated goal becomes a selected hypothesis.

### Applying Proof Rules

A user wishing to attempt an interactive proof has a number of proof rules available, and these may be either rewrite rules or inference rules. In the Goal and the Selected Hypotheses views various operators may appear in red coloured font. The red font indicates that some interactive proof rule(s) are applicable and may be applied as a step in the proof attempt. When the mouse hovers over such an operator a number of applicable rules may be displayed; the user may choose to apply one of the rules by clicking on it.

Other proof rules can be applied when green buttons appear in the Goal and Selected Hypotheses views. Examples are proof by contradiction , that we have already encountered; and for conjunction introduction in the goal.

To instantiate a quantifier the user enters the desired expression in the box behind the quantifier and clicks on the quantifier:

#### Rewrite Rules

Rewrite rules are one-directional equalities (and equivalences) that can be used to simplify formulas (the goal or a single hypothesis). A rewrite rule is applied from left to right when its *side condition* holds; it can be applied either in the goal predicate, or in one of the selected hypotheses.

A rewrite rule is applied either automatically (**A**) or manually (**M**):

- automatically, when post-tactics are run.
- automatically, when auto-tactics are run.
- manually, through an interactive command. These rules gather non equivalence laws, definition laws, distributivity laws and derived laws.

Automatic rewrite rules are equivalence simplification laws.

Each rule name indicates the rule's characteristics according to the following convention:

- the law category: simplification law (SIMP), definition law (DEF), distributivity law (DISTRI), or else derived law (DERIV).
- the root operator of the formula on the left-hand side of the rule, e.g. predicate AND, expression BUNION.
- (optionally) the terminal elements on the left-hand side of the rule: special element (SPECIAL) such as the empty-set, type expression (TYPE), same element occurring more than once (MULTI), literal (LIT). A type expression is either a basic type (, any carrier set), or (type expression), or type expressiontype expression.
- (optionally) some other description of a characteristic, e.g. left (L), right (R).

Rewrite rules having a symmetric operator on the left-hand side may also describe other rules. eg: the rule:

should also produce the rule:

For associative operators in connection with distributive laws as in:

it has been decided to highlight the first associative/commutative operator (the ). A menu is presented when hovering the mouse over the operator: the first menu option distributes all associative/commutative operators, the second option distributes only the first associative/commutative operator. In order to simplify the explanation we write associative/commutative operators with two parameters only. However, *we must emphasise here*, that generally we may have a sequence of more than two parameters. So, we write instead of . Rules are sorted according to their purpose.

Rules marked with a star in the first column are implemented in the current prover. Rules without a star are planned for implementation.

Rewrite rules are split into:

They are also available in a single large page All Rewrite Rules.

#### Inference Rules

Inference rules (see Proof Rules) are applied either automatically (A) or manually (M).

Inference rules applied automatically are applied at the end of each proof step. They have the following possible effects:

- they discharge the goal,
- they simplify the goal and add a selected hypothesis,
- they simplify the goal by decomposing it into several simpler goals,
- they simplify a selected hypothesis,
- they simplify a selected hypothesis by decomposing it into several simpler selected hypotheses.

Inference rules applied manually are used to perform an interactive proof. They can be invoked by clicking on the red highlighted operators in the goal or the hypotheses. A menu is presented when there are several options.

See Inference Rules list.

## The Proof Control View

The Proof Control view contains the buttons which you can use to perform an interactive proof.

The Proof Control view offers a number of buttons whose effects we briefly describe next; moving from left to right on the toolbar:

- (
**nPP**) invokes the new predicate prover, a drop-down list indicates alternative strategies. - (
**R**) indicates that a node has been reviewed: in an attempt by the user to carry out proofs in a stepwise fashion, they might decide to postpone the task of discharging some proofs until a later stage. To do this the proofs can be marked as reviewed by choosing the proof node and clicking on this button. This indicates that by visually checking the proof the user is convinced that they can discharge it later, but they do not want to do it right now. - (
**p0**) the PP and ML provers can be invoked from the drop-down list using different forces. - (
**dc**) do proof by cases: the proof is split into two branches. In the first branch:- the predicate supplied by the user is added to the Selected Hypotheses, and the user attempts to discharge this branch. In the second branch :- the predicate supplied by the user is negated and added to the Selected Hypotheses; the user then attempts to discharge this branch.

- (
**ah**) add a new lemma: the predicate in the editing area should be proved by the user. It is then added as a new selected hypothesis. - (
**ae**) abstract expression: the expression in the editing area is given a fresh name. **the robot**: invokes the auto-prover which attempts to discharge the goal. The auto-prover is applied automatically on all proof obligations after a "save" without any intervention of the user. Using this button, you can invoke the auto-prover within an interactive proof.- the
**post-tactic**is executed , **lasoo**: load into the Selected Hypotheses window those hidden hypotheses that contain identifiers in common with the goal, and with the selected hypotheses.**backtrack**form the current node (i.e., prune its parent),**scissors**: prune the proof tree from the node selected in the proof tree,**Search Hypotheses**: find hypotheses containing the character string in the editing area, and display in the Search Hypothesis view.**Cache Hypotheses**: press this to display the*"Cache Hypotheses"*view. This view displays all hypotheses that are related to the current goal.- load the
**previous**undischarged proof obligation, - load the
**next**undischarged proof obligation, **(i)**show information corresponding to the current proof obligation in the corresponding window. This information correspond to the elements that directly took part in the proof obligation generation (events, invariant, etc.),- goto the next
**pending**node of the current proof tree, - load the next
**reviewed**node of the current proof tree. **Disable/Enable Post-tactics**: allows the user to choose whether post-tactics run after each interactive proof step.

### The Smiley

The smiley can be one of three different colors: (1) red, indicates that the proof tree contains one or more undischarged sequents, (2) blue, indicates that all undischarged sequents of the proof tree have been reviewed, (3) green, indicates that all sequents of the proof tree are discharged.

### The Editing Area

The editing area allows the user to supply parameters for proof commands. For example, when the user attempts to add a new hypothesis (by clicking on the lemma **ah** button), the new hypothesis should have been written by the user in the editing area.

### ML/PP and Hypotheses

#### ML

ML (mono-lemma) prover appears in the drop-down list under the button (**pp**) as M0, M1, M2, M3, ML.
The different configuration (e.g., M0) refer to the proof force of the ML prover. **All hypotheses** are passed to ML.

#### PP

PP (predicate prover) appears in the drop-down list under the button (**pp**) as P0, P1, PP.

- P0 uses
**all selected hypotheses**(the ones in**Selected Hypotheses**window). - P1 employs a
**lasoo**operation to the selected hypotheses and the goal, and uses the resulting hypotheses. - PP uses
**all hypotheses**.

## The Search Hypotheses View

By typing a string in the **Proof Control** window and pressing the **Search Hypotheses** button a window is provided which contains the hypotheses having a character string in common with the one entered by the user in the editing area. For example, if we search for hypotheses involving the character string "cr", then after pressing the **Search Hypothesis** button on the proof control window, we obtain the following:

This view also integrates a "quick search" area (A), that allows us to search quickly hypotheses involving short character strings such as "cr". A **search hypothesis button (B)** that behaves the same as the button of the proving window, a **refresh button (C)** that updates the window manually for more control, and a **drop down menu (D)** to set the preferences of the view up.

By pressing **return** key or the button (B) (once a short string has been given in the input area (A)), hypotheses can be searched quickly as if we used the **Proof Control** as described before.

The drop down menu (D) is accessible to set some preferences over the searched hypotheses :

If we change preferences for the search, we might need to "update" manually the view with the button (C). By selecting "Consider hidden hypotheses in search" option, we can review all hypotheses that have been unselected in the selected hypotheses window(more info about selected/hidden hypotheses...).

To move any of these hypotheses to the **Selected Hypotheses** window, select those required (using the check boxes) and press the button. Adding these hypotheses to the selected hypotheses means that they will be visible to the prover. They can then be used during the next interactive proof phase.

To remove hypotheses from the **Search Hypotheses** window use the button. This button also appears above the selected hypotheses, and allows the user to remove any hypothesis from the **Selected Hypotheses** window.

The other button, situated to the left each hypotheses, is the button. clicking on this will attempt a proof by contradiction. The effect is the same as if the hypothesis were in the **Selected Hypotheses**.

## The Cache Hypotheses Window

This window allows the user to keep track of recently manipulated (e.g., used, removed, selected) hypotheses for any PO. For example, when the user applies a rewrite to an hypothesis, a new hypothesis (after the rewriting) is selected, and the original hypothesis is deselected and put in the **Cache Hypotheses** window.

Similar operations (to that of the **Selected Hypotheses** and **Search Hypotheses** windows) such as removing, selecting and proof by contradiction (**ct**) are also available for the cached hypotheses. Interactive proof steps (e.g., rewriting) can also be carried out from the **Cache Hypotheses** window as well as the **Search Hypotheses** window.

## Proof Information View

This view displays information so that the user can relate a proof obligation to the model. For example, typical information for an event invariant preservation PO includes the event; as well as the invariant in question. In the following example, the hyperlinks 'CreateToken' and 'inv2' can be used to navigate to the containing machine.

## Rule Details View

This view displays the information relative to a given proof tree node, on which a rule was applied.

A command is available when right-clicking on a proof tree node, in order to reveal the Rule Details View (See picture below).

By default, this view is a fast view. A button (identified by the view's icon) is then available at the bottom left of the workbench, to show up this view.

Here is an overview of the Rule details view :

A quick view on the applied rule contents is provided. On the picture above, we display the contents of the rule named "∀ hyp mp" where an input has been used to instantiate an hypothesis.

One can see quickly which was the input used by the instanciation (following **instantiated with**), and which was the hypothesis considered by this rule (this is given by the hypothesis of **Input Sequent**).

Furthermore, it is possible to view the antecedents created by this rule in details (i.e. child proof tree nodes) and the actions performed on hypotheses : selection, deselection, etc.

## Auto-tactic and Post-tactic

The auto-tactic applies a combination (i.e. ordered list) of *rewrite*, *inference* tactics and *external provers* to newly generated proof obligations. However, they can also be invoked by the user by clicking on the button in the **Proof Control** view. The user can deactivate the automatic application of the auto-prover by unselecting **Prove automatically** available from the menu Project.

Post-tactic is also a combination of *rewrite*, *inference* tactic and *external provers*, and is applied __automatically after each interactive proof step__. However, it can also be invoked manually by clicking on the button in the **Proof Control** view.

Note that the post-tactic can be disabled quickly by clicking on the little arrow (marked with an A on the figure below) of the **Proof Control** view (right upper corner) and then on "Disable post-tactic" (B):

### Principles

The ordered list of *rewrite*, *inference* tactics and *external provers* that should be applied is called a **profile**. There are two default profiles, one for the auto-tactic and one for the post-tactic. These default profiles are immutable in time, but can be duplicated for further modification by the user. Indeed, the user can edit a profile and select it to run as automatic or post tactic. The idea is to have a set of available tactic profiles to be used as needed.
Moreover, these edited profiles are shipped with projects if defined at this scope, or can be imported or exported if defined at a workspace level, which is very useful to share them.

There are two ways to run the automatic or post tactics:

- the manual way consists into clicking on the button, or the button in the Proof Control view, to respectively launch the auto-tactic (with the selected auto-tactic profile) and the post-tactic (with the selected post-tactic profile).
- the automatical way if such preference is activated. (Auto-tactic after each proof step, and post-tactic at each step and rebuild) The mandatory condition for post-tactics or auto-tactics to automatically run is that they should be activated from their preference or property.

The user can separately define tactic profiles and assign them to post and auto tactics. Therefore, there are two tabs in the "Auto/Post Tactic" preference page to address these choices. These tabs will be descibed in the two next sections.

### Preferences for the selected auto and post tactic profile

This section describes the "Auto/Post Tactic" tab of the "Auto/Post Tactic" preference page.

There are two scopes to set up preferences for the auto and post tactics : at workspace level, and at project level. Note that if the automatic application of tactics (auto or post) is decided only at workspace level, and this choice is held at project level.

To access these preferences, one as to go open the "Auto/Post Tactic" preference page that can be found after "Window > Preference > Sequent Prover".

The figure below shows the "Auto/Post Tactic" Preference page:

The buttons 1 and 2 are activating/deactivating the automatic use of auto or post tactics.
One can also see on this picture the selected profile to be use as auto and post tactic.

**Note that there is always a profile selected, and this profile can be changed whether the tactic are automatically launched or not, as there is alway a way to manually launch auto and post tactics.**

On the preference appearing above, the *Default Auto Tactic Profile* is used to compose the automatic tactic, and the *Default Post Tactic Profile* is used to compose the post-tactic.

The figure below shows the "Auto/Post Tactic" Preference page with both auto-tactic and post-tactic to automatically run, and where the user selects the profile "MyFirstTacticProfile" to be used as auto-tactic profile.

### Preferences for available profiles

This section describes the "Profile" tab of the "Auto/Post Tactic" preference page.

The figure above shows the contents of the profile tab. There are two visible lists : a list of profiles on the left the tactics or provers that compose these profiles (Profile Details). Here one can see the contents of the Defaut Auto Tactic Profile.

There are 4 buttons available to the user :

- New : to create a new profile "from scratch",
- Edit : to edit an existing (editable) profile,
- Remove : to remove a profile definitively,
- Duplicate : to duplicate a selected profile for further slight modification,

Default profiles can not be edited nor removed. That is why they are greyed on the image above.